ILASS-Americas
 

CURRENT AWARD WINNERS

2016
HAROLD C. SIMMONS
AWARD
PRESENTED TO

2016
W. R. MARSHALL
AWARD
PRESENTED TO

 

Gina Magnotti

“Characterization of Diesel Spray Breakup Models Using Visible and X-Ray Extinction Measurements”

Presented at ILASS 2017
(co-author Caroline Genzale)

 

 

Eli Baldwin, Ronald Grover, Daniel Duke,
Katarzyna Matusik, Alan Kastengren, Christopher Powell, Scott Parrish, and David Schmidt

“String Flash-Boiling in Flashing and Non-Flashing Gasoline Direct Injection Smulations with Transient Needle Motion”

Presented at ILASS-2017


Past Award Winners

HAROLD C. SIMMONS
AWARD WINNERS


2015
P. Guillet
Production of Substructured Fat Systems by Co-spraying of Two Different Fat
(-emulsions) with Very-Low Emulsifier Concentration and Controlled Fat Polymophism

 

 

W. R. MARSHALL
AWARD WINNERS


2015
Film Stabilization as Key Step of Atomization Process for Spray-Drying of Highly Concentrated Emulsions or Suspensions

Michael Stranzinger
Nestec, Ltd.


 

2014
Mark Owkes
Sibley School of Mechanical and
Aerospace Engineering

Cornell University
Consistent and Conservative Computational Framework for High Density Ratio Simulations (co-author O. Desjardins)

 

 

2014
Synchrotron X-Ray Measurements
of Cavitation

Daniel Duke,
Alan Kastengren, and
Christopher Powell
Argonne National Laboratory

2013
D.T. Ryddner
Department of Mechanical Engineering
University of Madison, Wisconsin Madison,
for A Fully Resolved UWS Droplet Simulation (co-author JM.F. Trujillo

 

  2013
Breakup and Dynamics of Liquid Droplets
P. Khare, D. Ma, X. Chen, and V. Yang

2012
Suraj Deshpande
University of Wisconsin-Madison:  Characteristics of a Hollow-Cone Spray in Crossflow (co-authors Jia Gao and Mario Trujillo)

 

  2012
A Dense Fluid Approximation for the Simulation of Diesel Fuel Injection
Rainer Dahms, Lyle Pickett, and Joseph Oefelein (Sandia National Laboratories)

2011 
Samir Tambe
University of Cincinnati:  Three Dimensional Penetration and Velocity Distribution of Liquid Jets Injected Transversely into a Swirling Crossflow (co-authors San-Mou Jeng)

 

  2011
Exhaust Tailpipe Fuel Spray Optimization and Fuel Usage Rates for Operating an Exhaust Aftertreatment System on Heavy-Duty Diesel Powered Engine
James McCarthy, R. Daniel Bamber, and Steve Ambrose (Eaton Corporation): 
2010
Matthew Svreck
Stanford University:  Effect of Extreme Compression on Diesel Spray Penetration and Dispersion (co-authors S.L. Miller and C.F. Edwards)

 

  2010
Modeling Sub-Grid Scale Mixing of Vapor in Diesel Sprays using Jet Theory
Neerav Abani and Rolf Reitz of the University of Wisconsin-Madison
2009 
Anita Ramirez,
University of Illinois--Chicago: Quantitative Measurement of Diesel Fuel Spray Characteristics in the Near-Nozzle Region of a Multi-Hole Injector: (Co-authors: S. Som, S.K. Aggarwal (also UIC) and A. Kastengren, E. El-Hannouny, D. Longman, C. Powell, Argonne National Laboratory)

 

  2009
On Simulating Primary Atomization Using the Refined Level Set Grid Method
Marcus Herrmann of Arizona State University
2008
Andre McDonald
University of Toronto:  Impact of Plasma-Sprayed Particles on Textured Silicon Wafers (co-authors Sanjeev Chandra, University of Toronto, Larry Rosenzweig, GE Global Research, Christian Moreau, National Research Council Canada)

 

  2008
Investigation of the Effect of Injector Internal Geometry on the Penetration of a Plain Liquid Jet into a Subsonic Crossflow
Christopher Brown, Ulises Mondragon, and Vincent McDonell (Energy Research Consultants): 
2007
James Smith
(University of Michigan):  Real-Time Imaging of Fuel Injection, Ignition, and Combustion in a Direct-Injected Spark-Ignition Engine (co-author Volker Sick)

 

  2007
Behavior of a Rocket-Like Coaxial Injector in an Acoustic Field
. D. W. Davis, B. Chedroudi, and D.G. Talley
2006
Brandon Masuda (University of California, Irvine):  Liquid Jet Injected into a Crossflow at Elevated Temperature and Pressure (co-authors Vincent McDonell, UC Irvine; Gary Oskam Solar Turbines)

  2006
Breakup of Round Turbulent Liquid Jets in Air Crossflows. K. Lee, F. J. Diez, G. M. Faeth, University of Michigan, C. Aalburg,G.E. Global, K.A. Sallam,Oklahoma State University
2005
R. Branam
Department of Aerospace Engineering,
The Pennsylvania State University, University Park, PA 16802 USA
Molecular Dynamics Simulations of Supercritical Jet Mixing
  2005
Multiple Scattering Effects on Infrared Scattering Measurements used to Characterize Droplet Size and Volume Fraction Distributions in Diesel Sprays
J.E. Labs and T.E. Parker
Division of Engineering, Colorado School of Mines, Golden, Colorado 80401 USA

 

2004
A. Wadhwa,
Purdue University, West Lafayette, IN 47907-2014, USA
A Hybrid Compressible-Incompressible Numerical Method to Compute Transient Flows Past Droplets

 

  2004
A Model for Droplet and Spray Vaporization Under Elevated Pressure Conditions Using Continuous Thermodynamics. D. Wang and C.F. Lee, Department of Mechanical and Industrial Engineering, University of Illinois at Champaign-Urbana, Urbana, IL

 

2003
Vala Mehdi-Nejad
University of Toronto
Bubble Entrapment During Droplet Impact
  2003
A Review on Penetration Heights of Transverse Liquid Jets in High-Speed Flows.
K.-C. Lin, P. J. Kennedy: Taitech, Inc., Beavercreek, Ohio 45430
T. A. Jackson: Air Force Research Laboratory, Propulsion Directorate Wright-Patterson AFB, Ohio 45433, USA

 

    2002
Through the Diesel Nozzle Hole -- a Journey of Discovery

Soteriou, Andrews, Torres, Smith, & Kunkulagunta
Delphi Diesel Systems, UK
News & Events
  • News & Events

  • Atomization and Sprays

    The Journal of the International Institutes for Liquid Atomization and Spray Systems

    Join Our Mailing List

    Email:
    For Email Newsletters you can trust
  • Inquiries regarding ILASS-Americas should be directed to:

    Professor Scott Samuelsen
    Secretariat, ILASS-Americas
    UCI Combustion Laboratory 
    University of California, Irvine
    Irvine, CA 92697-3550
    Tel: (949) 824-5468
    Fax: (949) 824-7423
    E-mail: Info@ilass.uci.edu